User Manual

Network Camera User Manual

should be met to trigger capture and alarm.

Face Exposure

Enable the function, and the device automatically adjusts exposure level when human faces

appear in the scene.

Reference Brightness

It refers to the reference brightness of a face in the face exposure mode. If a face in the

actual scene is brighter than the set reference brightness, the device lower the exposure

level. If a face in the actual scene is darker than the set reference, the device increases the

exposure level.

Minimum Duration

The extra time the device keeps the face exposure level after the face disappears in the

scene.

Face Filtering Time

It means the time interval between the camera detecting a face and taking a capture action. If

the detected face stays in the scene for less than the set filtering time, capture will not be

triggered. For example, if the face filtering time is set as 5 seconds, the camera will capture the

detected face when the face keeps staying in the scene for 5 seconds.

10.3.4 Set Shield Region

The shield region allows you to set the specific region in which the set smart function rule is

invalid.

Steps

1. Select Shield Region.

2. Click to draw shield area. Repeat this step above to set more shield regions.

3. Optional: Click to delete the drawn areas.

4. Click Save.

10.4 Face Counting

Face counting detection can remove the duplicate faces and calculate the number of objects

entered or exited a certain configured area.

Note

● For certain device models, you need to select Face Counting on VCA Resource page first.

● Only certain camera models support this function.