User Manual

Network Camera User Manual
97
Custom, Head Shot, Half-Body Shot and Full-Body Shot are selectable.
Note
If you select Custom, you can customize width, head height and body height as required.
You can check Fixed Value to set the picture height.
Background Picture Settings
Comparing to target picture, background picture is the scene image offers extra environmental
information. You can set the background picture quality and resolution. If the background image
need to be uploaded to surveillance center, check Background Upload.
People Counting Overlay
Select flow overlay type.
Select the daily reset time. Click Manual Reset if you want to reset right now.
Camera
You can set Device No. and Camera Info. for the camera, which can be overlaid on captured
picture.
Text Overlay
You can check desired items and adjust their order to display on captured pictures by .
The content of Device No. and Camera Info should be on the same page.
10.4.3 Face Counting Algorithm Parameters
It is used to set and optimize the parameters of the algorithm parameters for Face Counting.
Note
These functions vary according to different models.
Face Capture Mode
It refers to the current algorithm version, which cannot be edited.
Best Shot
The best shot after the target leaves the detection area.
Capture Times
It refers to the capture times a face will be captured during its stay in the configured area.
The default value is 1.
Capture Threshold
It refers to the quality of face to trigger capture and alarm. Higher value means better quality
should be met to trigger capture and alarm.
Face Exposure