User Manual

Network Camera User Manual
101
the queue at different queue length levels.
Steps
Note
With an on-board memory card installed, the device can save up to one mouth's data. With NO
memory card installed, the device can only save up to one week's data.
1. Select the analysis mode.
Queuing-Up Time Analysis
Queuing-Up time analysis calculates people number of different waiting time levels.
Queue Status Analysis
Queue status analysis calculates the time and duration that a queue stays a certain length.
2. Select Statistic Type.
Regional Comparison
Multiple regions and one level can be selected for analysis, and an analysis chart can be
drawn.
Multi-Level Comparison
Multiple levels and regions can be selected for analysis, and one analysis chart is drawn for
each region.
3. Check one or more regions.
4. Set the queue length level. Check one or more desired range checkboxes and input values.
5. Select Report Type and Statistics Time.
6. Click Counting to generate the report.
10.6 Counting
It helps to calculate the number of people entering or exiting a certain configured area.
Note
Counting is only supported by certain models.
10.6.1 Set Counting
It is used to calculate the objects entering and exiting the region, alarm events, and upload data.
Steps
1. Go to Configuration → Counting.
2. Check Enable Counting.