User Manual

Network Camera User Manual
102
3. Optional: Check Enable OSD Overlay, and the real-time number of people entering and exiting
the region is displayed on the live video.
Note
The overlay information only counts the number of the current day. The number is cleared
when the device is restarted or midnight comes. You can also click to clear the number
manually.
4. Set the detection line and the objects across the line will be detected and counted.
Draw a detection line.
Delete the detection line.
Change the direction.
Figure 10-4 Set Counting
5. For the arming schedule settings, refer to Set Arming Schedule. For the linkage method settings,
refer to Linkage Method Settings.
6. Click Save.
10.6.2 View Counting Statistics
You can view and export the counting statistics stored in device or memory card.
Before You Start
Go to Set Counting to set queue management first.
Steps
1. Go to Application.
2. Select Report Type.
3. Select Statistics Type.
4. Select Start Time.