User Manual

Network Camera User Manual
32
2. Check Enable and set the level. The higher the level is, the larger the frame rate and bitrate
are, and the shorter the recommended storage time is.
3. Set the storage time. The device automatically calculates the bitrate and offers the
recommended storage time according to the memory card space and level. You are
recommended to set the storage time to the device recommended time.
Note
● If the lite storage is enabled, unformatted memory card will be formatted automatically.
● The displayed available space of the memory card is assigned by default according to
Percentage of Record in Storage → Storage Management → Quota. You can adjust it as
required.
● Only certain device models support the function.
5.2.4 Playback and Download Video
You can search, playback and download the videos stored in the local storage or network storage.
Steps
1. Click Playback.
2. Set search condition and click Search.
The matched video files showed on the timing bar.
3. Click to play the video files.
– Click to clip video files.
– Click to play video files in full screen. Press ESC to exit full screen.
Note
Go to Configuration → Local, click Save clips to to change the saving path of clipped video files.
4. Click on the playback interface to download files.
1) Set search condition and click Search.
2) Select the video files and then click Download.
Note
Go to Configuration → Local, click Save downloaded files to to change the saving path of
downloaded video files.
5.3 Capture Configuration
The device can capture the pictures manually or automatically and save them in configured saving