User Manual

Network Camera User Manual

Figure 6-9 Set Rule

5. Optional: Repeat the above steps to set more regions.

6. For the arming schedule settings, see Set Arming Schedule. For the linkage method settings, see

Linkage Method Settings.

7. Click Save.

Note

The function is only supported by certain models. The actual display varies with the models.

6.2.12 Draw Area

This section introduces the configuration of area.

Steps

1. Click Draw Area.

2. Click on the live view to draw the boundaries of the detection region, and right click to complete

drawing.

3. Click Save.

Note

Click Clear All to clear all pre-defined areas.

6.2.13 Set Size Filter

This part introduces the setting of size filter. Only the target whose size is between the minimum