User Manual

Network Camera User Manual
59
Click Refresh
Refresh the dial status.
Click Disconnect
Disconnect the 3G/4G wireless network.
When the Dial Status turns to Connected, it means a successful dial.
7. Access the device via the IP Address of the computer in the network.
– Input the IP address in the browser to access the device.
– Add the device in client application. Select IP/Domain, and input IP address and other
parameters to access the device.
7.8.2 Set White List
Add the mobile phone number of administrator to the white list in order to receive alarm message
from the device.
Steps
1. Go to white list settings page: Configuration → Advanced Configuration → Wireless Dial →
White List.
2. Check Enable SMS Alarm.
3. Click in the white list.
1) Input the mobile phone number to receive alarm message.
2) Check Reboot via SMS.
3) Select the certain events, and the mobile phone can receive the alarm message when the
event happens.
4) Click Save.
5) Optional: Repeat the steps above to set multiple recipients.
Modify the white list parameters.
Delete the white list that already set.
Send Test SMS
Send a message to the mobile phone for test.
4. Click Save.
7.9 Wi-Fi
Connect the device to wireless network by setting Wi-Fi parameters.
Note
This function is only supported by certain device models.