User Manual

Network Camera User Manual

transmission.

Steps

1. Go to Configuration → Network → Advanced Settings → Alarm Server.

2. Enter Destination IP or Host Name, URL, and Port.

3. Select Protocol.

Note

HTTP, HTTPS, and ISUP are selectable. It is recommended to use HTTPS, as it encrypts the data

transmission during communication.

4. Click Test to check if the IP or host is available.

5. Click Save.

7.13 Access Camera via Hik-Connect

Hik-Connect is an application for mobile devices. Using the App, you can view live image, receive

alarm notification and so on.

Before You Start

Connect the camera to network with network cables.

Steps

1. Get and install Hik-Connect application by the following ways.

Visit https://appstore.hikvision.com to download the application according to your mobile phone

system.Visit the official site of our company. Then go to Support → Tools → Hikvision App

Store.Scan the QR code below to download the application.

Note

If errors like "Unknown app" occur during the installation, solve the problem in two ways.

Visit https://appstore.hikvision.com/static/help/index.html to refer to the troubleshooting.Visit

https://appstore.hikvision.com/, and click Installation Help at the upper right corner of the

interface to refer to the troubleshooting.

2. Start the application and register for a Hik-Connect user account.

3. Log in after registration.