User Manual

Table Of Contents
Network Camera User Manual
6. Click Save to save the settings.
Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP address
conflicted and illegal login to the cameras.
1. Enter the Exception Settings interface: Configuration > Event > Basic Event >
2. Check the checkbox to set the actions taken for the Exception alarm. Refer to
Task 3: Set the Linkage Method for Motion Detection in 10.1.1 Configuring
Motion Detection.
3. Click Save to save the settings.
Configuring Flashing Alarm Light Output
Flashing Alarm Light Output Settings