User Manual

Table Of Contents
Network Camera User Manual
Event > Intrusion Detection.
Intrusion Detection
2. Check the checkbox of Enable to enable the function.
3. Select a region number from the drop-down list of Region.
Region: A pre-defined vertexes area on the live view image. Targets, such as,
people, vehicle or other objects, who enter and loiter in the region will be
detected and trigger the set alarm.
4. Set the Max. Size and Min. Size for valid targets. Targets smaller or larger than
the valid target size are not able to trigger detection. Select a point in the live
image as the start to draw a rectangle as the max. size or min. size.
Max. Size: The maximum size of a valid target. Targets with larger sizes would
not trigger detection.