Table Of Contents
Network Camera User Manual
10. Click the Arming Schedule to set the arming schedule.
11. Click Linkage Method to select the linkage methods for intrusion detection,
including Notify Surveillance Center, Send Email, Upload to FTP/Memory
Card/NAS, Trigger Channel, Trigger Alarm Output, Flashing Alarm and Audible
Note: Only certain models support Trigger Channel, Trigger Alarm Output,
Flashing Alarm and Audible Warning.
12. Click Save to save the settings.
Configuring Region Entrance Detection
Region entrance detection function detects people, vehicle or other objects that
enter a pre-defined virtual region from the outside place, and some certain actions
can be taken when the alarm is triggered.
1. Enter the Region Entrance Detection settings interface, Configuration > Event >
Smart Event > Region Entrance Detection.