Table Of Contents
Network Camera User Manual
1. Run the SADP software to search the online devices.
2. Check the device status from the device list, and select the inactive device.
The SADP software supports activating the camera in batch. Refer to the user manual
of SADP software for details.
3. Create and input the password in the password field, and confirm the password.
A password with user name in it is not allowed.
STRONG PASSWORD RECOMMENDED– We highly recommend you
create a strong password of your own choosing (using a minimum of 8
characters, including at least three of the following categories: upper
case letters, lower case letters, numbers, and special characters) in
order to increase the security of your product. And we recommend you
reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your
You can enable the Hik-Connect service for the device during activation.
Select inactive device.
Input and confirm