Table Of Contents
Network Camera User Manual
4. Click Activate to start activation.
You can check whether the activation is completed on the popup window. If
activation failed, please make sure that the password meets the requirement and try
5. Change the device IP address to the same subnet with your computer by either
modifying the IP address manually or checking the checkbox of Enable DHCP.
Modify the IP Address
6. Input the admin password and click Modify to activate your IP address
The batch IP address modification is supported by the SADP. Refer to the user manual
of SADP for details.
Activation via Client Software
The client software is versatile video management software for multiple kinds of
Get the client software from the supplied disk or the official website, and install the