Table Of Contents
Network Camera User Manual
Add Network Disk
2. Enter the IP address of the network disk, and enter the file path.
3. Select the mounting type. NFS and SMB/CIFS are selectable. And you can set the
user name and password to guarantee the security if SMB/CIFS is selected.
Note: Please refer to the NAS User Manual for creating the file path.
For your privacy and to better protect your system against security risks,
we strongly recommend the use of strong passwords for all functions and
network devices. The password should be something of your own
choosing (using a minimum of 8 characters, including at least three of
the following categories: upper case letters, lower case letters, numbers
and special characters) in order to increase the security of your product.
Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
4. Click Test to check whether the network disk is available.
5. Click Save.
Up to 8 NAS disks can be connected to the camera.
Memory Card Detection
With memory card detection, you can view the memory card status, lock your
memory card, and receive notification when your memory card is detected