User Manual

Network Camera User Manual
56
Log Searching
4. To export the log files, click Export to save the log files.
System Service
Purpose:
System service settings refer to the hardware service the camera supports.
Supported functions vary according to the different cameras. For the cameras
support IR Light, ABF (Auto Back Focus), Auto Defog, or Status LED, you can select to
enable or disable the corresponding service according to the actual demands.
ABF: When ABF function is enabled, you can click on PTZ control panel to realize
auxiliary focus.
Third Stream: For some models, third stream is not enabled by default. Check Enable
Third Stream to enable the function.
eMMC Protection: If you enable eMMC protection, the lifespan of the eMMC is
displayed.
Enable Motion Detection: Check Enable Motion Detection to enable the function.