User Manual

Table Of Contents
Network Camera User Manual
Modify an IP
(3) Click the OK to finish modifying.
Delete an IP Address or IP Addresses.
Select the IP address(es) and click Delete.
5. Click Save to save the settings.
Security Service
To enable the remote login, and improve the data communication security, the
camera provides the security service for better user experience.
Note: Only certain camera models support the function.
1. Enter the security service configuration interface: Configuration > System >
Security > Security Service.
Security Service
2. Check the checkbox of Enable Illegal Login Lock.
Illegal Login Lock: it is used to limit the user login attempts. Login attempt from
the IP address is rejected if admin user performs 7 failed user name/password
attempts (5 times for the operator/user).
Note: If the IP address is rejected, you can try to login the device after 30