User Manual

Table Of Contents
Network Camera User Manual
Note: Only certain camera models support the function.
HTTPS Settings
HTTPS provides authentication of the web site and its associated web server, which
protects against Man-in-the-middle attacks.
For the camera that supports plug-in free live view, when you use HTTPS to visit
the camera, you should enable Websockets for live view. Go to Configuration >
Network > Advanced Settings > Network Service.
If HTTPS is enabled by default, the camera creates an unsigned certificate
automatically. When you visit the camera via HTTPS, the web browser will send a
notification about the certificate issue. Install a signed-certificate to the camera
to cancel the notification.
1. Enter the HTTPS settings interface. Configuration > Network > Advanced
Settings > HTTPS.
2. Check Enable to access the camera via HTTP or HTTPS protocol.
3. Check Enable HTTPS Browsing to access the camera only via HTTPS protocol.
HTTPS Configuration Interface
4. Create the self-signed certificate or authorized certificate.