User Manual

User Manual of Network Traffic Speed Dome
© Hikvision
26
1. Select any preset from the list.
2. Click the preset number you need on the keyboard.
Notes:
 The following presets are predefined with special commands. You can only call them but not
configure them. For instance, preset 99 is the “Start auto scan”. If you call the preset 99, the
speed dome starts auto scan function.
 Pattern function varies depending on the models of speed dome.
Table 4-5 Special Presets
Preset
Function
Preset
Function
33
Auto flip
92
Set manual limits
34
Back to origin
93
Save manual limits
35
Call patrol 1
94
Remote reboot
36
Call patrol 2
95
Call OSD menu
37
Call patrol 3
96
Stop a scan
38
Call patrol 4
97
Start random scan
39
Day mode (IR cut filter in)
98
Start frame scan
40
Night mode (IR cut filter out)
99
Start auto scan
41
Call pattern 1
100
Start tilt scan
42
Call pattern 2
101
Start panorama scan
43
Call pattern 3
102
Call patrol 5
44
Call pattern 4
103
Call patrol 6
45
One-touch Patrol
104
Call patrol 7
46
Day/Night Auto Mode
105
Call patrol 8
90
Wiper
Figure 4-8 Special Preset
Note:
You may need to use the OSD (On Screen Display) menu when controlling the speed dome
remotely. To display the OSD menu on the live view screen, you can call the preset number
95.