Digital Video Recorder Quick Start Guide User Manual
Digital Video Recorder Quick Start Guide Quick Start Guide COPYRIGHT © 2019 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”).
Digital Video Recorder Quick Start Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Digital Video Recorder Quick Start Guide Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement important points of the main text. Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury.
Digital Video Recorder Quick Start Guide Power Supply Instructions Use only power supplies listed below. For DS-7104HQHI-K1, DS-7108HQHI-K1, and DS-7104HUHI-K1. Standard Power Supply Models Manufacturer MSA-C1500IC12.0-18P-GB MOSO Technology Co., Ltd. British Shenzhen Honor Electronic Co., Ltd. MOSO Technology Co., Ltd. Shenzhen Honor Electronic Co., Ltd. Ningbo ISO Electronic Co., Ltd. MOSO Technology Co., Ltd. Shenzhen Honor Electronic Co., Ltd. ADS-26FSG-12 12018EPB MSA-C1500IC12.
Digital Video Recorder Quick Start Guide Chapter 1 Rear Panel Interfaces Description The rear panel interfaces vary with different models. Refer to Table 1-1 for the common interfaces description of rear panels.
Digital Video Recorder Quick Start Guide Before you start Ensure power is disconnected. Prepare a factory recommended HDD, and cross screwdriver. Bracket Installation Bracket installation is applicable when it requires to remove the device cover, and install HDD on the internal bracket. Bracket installation is applicable when it requires to remove the device cover, and install HDD on the internal bracket. Unfasten screws on the back, and push the cover backwards to remove the cover.
Digital Video Recorder Quick Start Guide Fix Mounting Ear Open Front Panel Insert HDD Fix-on-Bottom Installation Fix-on-bottom installation is applicable when it requires to install the HDD at the internal bottom. Unfasten screws on each panel to remove the device cover. Refer to Figure 2-7. Connect the data cable and power cable. Refer to Figure 2-8. Match HDD screw threads with the reserved holes on the device bottom, and fix HDD with screws. Refer to Figure 2-9.
Digital Video Recorder Quick Start Guide Controller Connection Chapter 3 Menu Operation Startup Proper startup is crucial to expand the life of DVR. It is HIGHLY recommended to use an Uninterruptible Power Supply (UPS) with the device. Plug power supply into an electrical outlet. Press the power button (certain models may have power button on the front or rear panel). The device begins to start. Activate Your Device No operation is allowed before activation.
Digital Video Recorder Quick Start Guide Enter the password in Create Channel Default Password to activate the network camera(s) connected to the device. Click OK to save the password and activate the device. Set Admin Password What to do next: When you have enabled Reserved E-mail Settings, continue to set the reserved email for the future password resetting. When you have enabled Export GUID, continue to export the GUID file to the USB flash drive for the future password resetting.
Digital Video Recorder Quick Start Guide Draw the Unlock Pattern User Login You have to log in to the device before operating the menu and other functions. Select User Name. Enter password for the selected user. Click OK to log in. For the admin, if you have entered the wrong password for 7 times, the account will be locked for 60 seconds. For the operator, if you have entered the wrong password for 5 times, the account will be locked for 60 seconds.
Digital Video Recorder Quick Start Guide Network Settings Configure Hik-Connect Hik-Connect provides mobile phone application and platform service to access and manage your connected devices, which enables you to get a convenient remote access to the surveillance system. Go to System > Network > Advanced > Platform Access. Check Enable to activate the function. Then the service terms will pop up. Enter the verification code in Verification Code.
Digital Video Recorder Quick Start Guide Set the analog signal input channels and types, and the connectable maximum IP camera number. Disabling analog channel(s) would increase the connectable IP camera number. Signal Input Status The interface of different models may vary. (Optional) You can enable 5 MP Long Distance Transmission for the Turbo HD and AHD signal input. 1) Click . 2) Check the channel(s) to enable 5 MP long distance transmission. 3) Click OK.
Digital Video Recorder Quick Start Guide Ensure the network connection is valid and correct, and the IP camera to add has already been activated. Please refer to the User Manual for activating the inactive IP camera. Go to Camera > IP Camera. Click Custom Add. Enter IP address, protocol, management port, and other information of the IP camera. Click Add. Add IP Camera Connect PoC Cameras Certain models support PoC (Power over Coaxitron) cameras connection.
Digital Video Recorder Quick Start Guide If the power consumption of the DVR is higher than that of the AF camera and lower than that of the AT camera, when AF camera is connected, it is powered on normally; when AT camera is connected, the live view image will notify insufficient power for PoC. Check the connected AF or AT camera number and the connectable camera number. Only Hikvision PoC camera is supported. The maximum connectable AT/AF camera number varies according to different models.
Digital Video Recorder Quick Start Guide Chapter 4 Accessing by Web Browser You can get access to the device via web browser. The following web browsers are supported: Internet Explorer 6.0, Internet Explorer 7.0, Internet Explorer 8.0, Internet Explorer 9.0, Internet Explorer 10.0, Apple Safari, Mozilla Firefox, and Google Chrome. The supported resolutions include 1024*768 and above. The use of the product with Internet access might be under network security risks.