Quick Start Guide

Network Traffic Camera·Quick Start Guide
2 Installation
Before you start:
 Make sure the device in the package is in good condition and all
the assembly parts are included.
 Make sure all the related equipment is power-off during the
installation.
 Check the specification of the products for the installation
environment.
 Make sure the power supply is matched with your required
voltage to avoid damage.
 If the product does not function properly, please contact your
dealer or the nearest service center. Do not disassemble the
camera for repair or maintenance by yourself.
 CS type lens is recommended, and you can use the adaptor ring if
C type lens is adopted.
2.1 Type I Camera Installation
Housing Installation
Steps:
1. Open the lock catch and take the baseplate out of the housing.
 Two kinds of housings are displayed in the figures below. And we
will take type I housing as an example in the following installation
steps.