Quick Start Guide

ManualsBrandsHikvision ManualsITS Products2 MP ANPR Smart Surveillance Camera

Table Of Contents

1 Appearance Description
- 1.1 Type I Camera Overview
  - 1.1.1 Side Panel Overview
  - 1.1.2 Rear Panel Overview
- 1.2 Type II Camera Overview
2 Installation
- 2.1 Type I Camera Installation
- 2.2 Type II Camera Installation
3 Setting the Network Camera over the LAN
- 3.1 Activating the Camera
  - 3.1.1 Activation via Web Browser
  - 3.1.2 Activation via SADP Software
- 3.2 Modifying the IP Address
4 Accessing via Web Browser

Network Traffic Camera·Quick Start Guide

 The housings need to be purchased separately.

Type I Housing

Figure 2-2 Type II Housing

2. Align the camera to the baseplate, and fit the camera to the

baseplate with supplied screws.