Quick Start Guide

ManualsBrandsHikvision ManualsITS Products2 MP ANPR Smart Surveillance Camera

Table Of Contents

1 Appearance Description
- 1.1 Type I Camera Overview
  - 1.1.1 Side Panel Overview
  - 1.1.2 Rear Panel Overview
- 1.2 Type II Camera Overview
2 Installation
- 2.1 Type I Camera Installation
- 2.2 Type II Camera Installation
3 Setting the Network Camera over the LAN
- 3.1 Activating the Camera
  - 3.1.1 Activation via Web Browser
  - 3.1.2 Activation via SADP Software
- 3.2 Modifying the IP Address
4 Accessing via Web Browser

Network Traffic Camera·Quick Start Guide

Place the Baseplate back to the housing

4. Install the pole mounting hoop to the cross-bar.

Install the Pole Mounting Hoop

5. Install the housing with the camera inside to the hoop.