Quick Start Guide

Network Traffic Camera·Quick Start Guide
Fix Screws
2.2.2 Wall/Ceiling Mounting
Steps:
1. Hook the two ends of the safety rope to the hole on the camera
body and the wall (or the ceiling).
Note:
If there is no proper place to secure the safety rope, you can hook
the other end of safety rope to the hole at the end of the plate.
But you have to make sure that the plate is firm enough to
bear/support the weight of the camera.
2. If you need to route cables through the wall (or the ceiling), drill a
cable hole in the wall (or the ceiling) according to the plate.
Otherwise, skip this step if you want to route the cables through
side outlet.
3. Route the cables of the camera.