Quick Start Guide

ManualsBrandsHikvision ManualsITS Products2 MP ANPR Smart Surveillance Camera

Table Of Contents

1 Appearance Description
- 1.1 Type I Camera Overview
  - 1.1.1 Side Panel Overview
  - 1.1.2 Rear Panel Overview
- 1.2 Type II Camera Overview
2 Installation
- 2.1 Type I Camera Installation
- 2.2 Type II Camera Installation
3 Setting the Network Camera over the LAN
- 3.1 Activating the Camera
  - 3.1.1 Activation via Web Browser
  - 3.1.2 Activation via SADP Software
- 3.2 Modifying the IP Address
4 Accessing via Web Browser

Network Traffic Camera·Quick Start Guide

4. Drill screw holes in the wall or ceiling according to the installation

screw hole on the template.

5. Secure the plate to the wall (or the ceiling) with expansion screws.

6. Fix two waterproof screw jackets on the template with supplied

screws.

7. Connect cables through the wall or side outlet.

8. Fix the camera to the plate with the supplied screws.

Wall Mounting

Ceiling Mounting