Quick Start Guide

Network Traffic Camera·Quick Start Guide
9. Adjust surveillance angel.
1) Loosen screw 1 to adjust panning position [0° to 360°]. Tighten
the screw.
2) Loosen screw 2 to adjust tilting position [0° to 90°]. Tighten the
screw.
3) Loosen screw 3 to adjust rotating position [0° to 360°]. Tighten
the screw.
Screw 1
Screw 2
Screw 3
Rotation Range
[0° to 360°]
Tilt Range
[0° to 90°]
Pan Range
[0° to 360°]
3-aixs Adjustment
2.2.3 Pole Mounting
Horizontal Pole Mounting
Steps:
1. Route the cables through the cross-bar.
2. Install the pole mounting hoop to the cross-bar.