Quick Start Guide

ManualsBrandsHikvision ManualsITS Products2 MP ANPR Smart Surveillance Camera

Table Of Contents

1 Appearance Description
- 1.1 Type I Camera Overview
  - 1.1.1 Side Panel Overview
  - 1.1.2 Rear Panel Overview
- 1.2 Type II Camera Overview
2 Installation
- 2.1 Type I Camera Installation
- 2.2 Type II Camera Installation
3 Setting the Network Camera over the LAN
- 3.1 Activating the Camera
  - 3.1.1 Activation via Web Browser
  - 3.1.2 Activation via SADP Software
- 3.2 Modifying the IP Address
4 Accessing via Web Browser

Network Traffic Camera·Quick Start Guide

Connect Two Parts of PT-Joint

6. Unscrew the plate of the camera and connect cables in the

cross-bar and junction box.

Connect Cables

7. Install the plate of the camera.