Quick Start Guide

ManualsBrandsHikvision ManualsITS Products2 MP ANPR Smart Surveillance Camera

Table Of Contents

1 Appearance Description
- 1.1 Type I Camera Overview
  - 1.1.1 Side Panel Overview
  - 1.1.2 Rear Panel Overview
- 1.2 Type II Camera Overview
2 Installation
- 2.1 Type I Camera Installation
- 2.2 Type II Camera Installation
3 Setting the Network Camera over the LAN
- 3.1 Activating the Camera
  - 3.1.1 Activation via Web Browser
  - 3.1.2 Activation via SADP Software
- 3.2 Modifying the IP Address
4 Accessing via Web Browser

Network Traffic Camera·Quick Start Guide

Install the Plate

8. Adjust the camera to the desired position, connect the video

out to the debug camera, and adjust the zoom and focus of

the camera.

Pole Mounting

Steps:

1. Route the cables through the cross-bar.

2. Install the plate to wall and fix waterproof screw jacket to the

plate.