User Manual

User Manual of Network Traffic Camera revise
9
Switch
ComputerTraffic Camera
Figure 2-2 Connecting via a Switch or a Router
2.2 Activating the Camera
You are required to activate the camera first by setting a strong password for it before
you can use the camera.
Activation via Web Browser and Activation via SADP Software are supported.
2.2.1 Activation via Web Browser
Steps:
1. Power on the camera, and connect the camera to the network.
2. Input the IP address into the address bar of the web browser, and press Enter to
enter the activation interface.
Figure 2-3 Activation Interface (Web)
3. Create a password and input the password into the password field.