User Manual

User Manual of Network Traffic Camera revise
18
Disable to disable the function.
 Ruler On: Enable ruler to measure the length of the captured license plate. You
can click Ruler Off to disable the function.
 Open Folder: Open the folder that saves the captured pictures.
 Capture: Click Capture to capture the picture, and the captured pictures will be
listed in the Picture List.
Figure 4-3 Picture List
Table 4-2 Description of Picture List Parameters
Item
Description
No.
Picture No.
Capture Time
The time of capturing the picture with millisecond
precision. For example, 20171011143350933 means
the picture is captured at 14:33:50:933, on October
11
th
, in 2017.
Lane No.
The lane where the vehicle is captured.
Plate Color
The color of the captured license plate.
Note: This function is not valid for this camera model.
License Plate No.
The license plate number of the vehicle.
Speed
The speed of the captured vehicle.
Illegal Type
The captured type, normal, wrong-way driving are
selectable.
Note: Detection of plate color, speed and illegal
behavior is not supported for this camera model.
Vehicle No.
The vechile counting No. ranging from 1 to 65535. It
will overwrite if it reachs the max. value.
Directory
The file path of the saved picture.
 Continuous Capture: Click Continuous Capture to set the parameters
including Lane No., Waiting Time, Capture Times, and Continuous Capture
Interval.