User Manual
Table Of Contents
- Chapter 1 System Requirement
- Chapter 2 Network Connection
- Chapter 3 Login
- Chapter 4 Live View
- Chapter 5 Picture Search
- Chapter 6 Log Search
- Chapter 7 Local Configuration
- Chapter 8 System Configuration
- Chapter 9 Encoding and Storage Configuration
- Chapter 10 Text Overlay Configuration
- Chapter 11 Capture Parameters Configuration
- Chapter 12 Image Parameters Configuration
- Chapter 13 Application Mode Configuration
- Chapter 14 Exception
- Chapter 15 Maintenance
- Appendix
User Manual of Network Traffic Camera revise
34
Chapter 9 Encoding and Storage
Configuration
Purpose:
You can configure the encoding and storage related parameters from this page,
including video encoding, image encoding, ROI, record schedule, redundant storage,
and FTP.
9.1 Configuring Video Encoding
Steps:
1. Go to Configuration >Device Configuration > Encoding and Storage > Video
Encoding.
Figure 9-1 Video Encoding
2. Configure the Main Stream Parameters:
The main stream is usually used for recording and live view with good bandwidth.
Stream Type: Video and Video & Audio are selectable.