User Manual
Table Of Contents
- Chapter 1 System Requirement
- Chapter 2 Network Connection
- Chapter 3 Login
- Chapter 4 Live View
- Chapter 5 Picture Search
- Chapter 6 Log Search
- Chapter 7 Local Configuration
- Chapter 8 System Configuration
- Chapter 9 Encoding and Storage Configuration
- Chapter 10 Text Overlay Configuration
- Chapter 11 Capture Parameters Configuration
- Chapter 12 Image Parameters Configuration
- Chapter 13 Entrances and Exits Configuration
- Chapter 14 Application Mode Configuration
- Chapter 15 Exception
- Chapter 16 Maintenance
- Appendix
Network Traffic Camera User Manual
55
Chapter 13 Entrances and Exits
Configuration
Purpose:
You can configure the vehicle whitelist and blacklist, and import, export, add, edit,
delete, or search the list.
Before you start:
Make sure the TF card is installed for the camera and can work normally.
Note:
The whitelist and blacklist function can be used normally only after the TF card is
installed and works normally, or selecting the 8 GB model device.
Steps:
1. Go to Configuration > Device Configuration > Entrances and Exits >
White-Black List.
Figure 13-1 Whitelist and Blacklist Configuration
2. Import whitelist and blacklist to the camera.
1) Click Import and the window pops up as below.
Figure 13-2 Import Whitelist and Blacklist
2) Click Download Template to download the list template.