User Manual

14
Note: Make the Receiving Coil (RX) away from the interference source. Make sure the interference level displayed on the environment
inspection indicator is less than 2.
Side-by-Side Installation
Side-by-side operation refers to the operation of two or more detectors in close proximity to each other. With side-by-side operation,
the detector may interfere with each other. The level of interference depends on the distance between the detector and their
operating frequency and sensitivity.
The detector has different working frequency selection. The operating frequency of each detector should be different
Installation and Wiring
1. Take out the device and accessories.
2. Install the door planks, beam, and main control panel. Tighten the screws to fix all the components.
3. Connect the detection cables.