User Manual

2. Click Restore or Default according to your needs.

Restore Reset device parameters, except user information, IP parameters and video format to the

default settings.

Default Reset all the parameters to the factory default.

Note

Be careful when using this function. After resetting to the factory default, all the parameters

are reset to the default settings.

Before You Start

You need to obtain the correct upgrade package.

Caution

DO NOT disconnect power during the process, and the device reboots automatically after upgrade.

Steps

1. Go to Configuration → System → Maintenance → Upgrade & Maintenance.

2. Choose one method to upgrade.

Firmware Locate the exact path of the upgrade file.

Firmware Directory Locate the directory which the upgrade file belongs to.

3. Click Browse to select the upgrade file.

4. Click Upgrade.

Go to Configuration → System → System Settings → About Device, and click View Licenses.

You can configure time and date of the device by configuring time zone, time synchronization and Daylight Saving Time (DST).

I. Synchronize Time Manually

Steps

1. Go to Configuration → System → System Settings → Time Settings.

2. Select Time Zone.

3. Click Manual Time Sync..

4. Choose one time synchronization method.

– Select Set Time, and manually input or select date and time from the pop-up calendar.

Check Sync. with computer time to synchronize the time of the device with that of the local PC.