Data Sheet

ISD-SMG318LT-F
Temperature Measurement Walk-Through Detector
Description
ISD-SMG318LT-F walk-through metal detector, adopting the
thermal imagery technology, realizes non- contact temperature
measurement. Face detection function of the camera makes an
accurate positioning of the measurement. The detector also
supports metal detection.
It is suitable for safety inspection of dangerous goods and is
widely used in public occasions and important places, etc.
It is recommended to be used indoor with a windless
environment.
Functions
 Non-contact temperature measurement: face temperature
measurement with accurately personnel matching.
Temperature accuracy:±0.5 ℃ , detection distance: 0.5
to 1.5 m, target height: 1.45 m to 1.85 m
 Temperature filtering: adjustable temperature threshold. An
over-threshold temperature will trigger the audible strobe
light
 Counting display: displays the walk-through people number,
metal alarm times, real time temperature, number of
people in abnormal temperature
 Metal detection: metal likes a clip
 Multi-Area alarm: Indicates the metal position on the body.
Max. 18 areas
 Modularized component: easy transmission and installation
Thermal Imaging Features
Smart Functions:
 Temperature exception detection
 Linkage for audible alarm
 Linkage of white strobe light alarm
Thermal Imaging Functions:
 Uncooled sensor, resolution: 160 x 120
 Supports AGC4.0, DDE, and 3DNR
 Supports dual-light fusion image
 Supports visible light and thermal imaging frame over lay
System Functions:
 Dual-channel, single IP
 Dual-streaming
 PoE power supply
 IP66 protective level
 Operation temperature: 5℃ to 40℃, ＜95% RH
Interfaces:
 10M/100M self-adapting network interface
 Micro SD/Micro SDHC/Micro SDXC card (128G/256G) slot
 1-ch alarm input/output