User's Manual

No. Descripon DIP Switch Status
recognion funcon, disable
door open via NFC card.
6 Wiegand protocol or RS-485
protocol.
1: Wiegand protocol
0: RS-485 protocol
7 Wiegand Protocol (available
when No. 6 is 1)
1: Wiegand protocol of 26-bit
0: Wiegand protocol of 34-bit
8 Matched Resistance (available
for RS-485 protocol)
1: Enable
0: Disable
3.3 Wiring Cables
Wire the cables between controller and card reader, thus to establish the communicaon between
them.
3.3.1
Descripon of Cable
The descripon of 10 cables is shown below.
Table 3-2
Descripon of Cable
Color Descripon
Yellow RS-485+
Brown Blue LED Control (available for Wiegand
Protocol)
Blue RS-485-
Purple Beep Control (available for Wiegand Protocol)
Gray Case Sensor (available for Wiegand Protocol)
Green Wiegand W0 (available for Wiegand Protocol)
White Wiegand W1 (available for Wiegand Protocol)
Black GND
Orange Red LED Control (available for Wiegand
Protocol)
Red PWR (DC +12V)
Card Reader User Manual
6