Quick Start Guide
1
2
DS-K1A802A Series
Fingerprint Time A�endance Terminal
Quick Start Guide
Appearance
Installation
Method 1:
Wall Mounting
without
Mounting Plate
Method 2:
Wall Mounting
with
Mounting Plate
2. Insert the screw sockets of the setscrews in the drilled
holes.
3. Fix and fasten the screws in the sockets on the wall or
other places. (You should reserve 5.2 mm to 5.5 mm for
4. Align the 4 holes on the device plate with
wall.
Screen
Keypad USB Interface Debugging
Port
Power
Interface
Network
Interface
Fingerprint
ESC OK
1
2
ABC
3
DEF
4
GHI
6
MNO
7
PQRS
8
TUV
9
WXYZ
5
JKL
Keys
Numeric Keys/
OK Key
Key
©2019 Hangzhou Hikvision Digital Technology Co., Ltd.
Product is governed by the user license agreement covering that Product.
About this Manual
Trademarks
and other Hikvision marks are the property of Hikvision and are
permission.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”,
WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY
QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD
PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR
AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS
PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN
CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL
BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES
FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING
FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET
SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF
REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN
YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR
USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT
THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW,
THE LATER PREVAILS.
During the use of device, personal data will be collected, stored and processed. To
protect data, the development of Hikvision devices incorporates privacy by design
As data controller, you are advised to collect, store, process and transfer data in
1. Drill 4 holes on the wall or other places
Note: The length and width will be 2 to 3 mm
smaller than the actual device’s.
UD15388B-A
0
OK Key:
for 3 s to enter the login interface.
Deleting Key:
number.
Numeric Keys/Letter Keys: Press the key to enter numbers
Key 0 can also represent a space key except you are using the
number input method.
Exiting Key: Press the key to exit the menu.
Direction Keys: Press , , and to move the cursor
on the screen. Or on the text entering page, press up or down
.
Editing Key:
and symbols.
Notes:
1. The pictures here are for reference only. Some models do not support
140 mm
155 mm
28 mm
Front View Side View Back View Keypad
152 mm
127 mm
4
4
Device
Mounting
Plate
Gang
Box Wall
Steps:
1. Install the gang box on the wall.
Note:
•
Make sure the gang box screw holes match the
•
The gang box here is for reference only. Select an
appropriate gang box to install.
•
The gang box is not supplied.
3. Route the device cable through the cable hole of
box.
1
2
3
120 mm
130.6 mm
25.15 mm
66.6 mm
53.2 mm
36.5 mm
83.65 mm
68.1 mm