DS-K1F600-D6E Series Enrollment Station User Manual
DS-K1F600-D6E Series Enrollment Station User Manual Legal Information User Manual ©2019 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons.
DS-K1F600-D6E Series Enrollment Station User Manual YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
DS-K1F600-D6E Series Enrollment Station User Manual Available Model Product Name Enrollment Station Model Description DS-K1F600-D6E Supports enroll face and card No. DS-K1F600-D6E-F Supports enroll face, fingerprint, and card No.
DS-K1F600-D6E Series Enrollment Station User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
DS-K1F600-D6E Series Enrollment Station User Manual or dispose of it at designated collection points. For more information see: www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).
DS-K1F600-D6E Series Enrollment Station User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions: Dangers: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage. Dangers: Follow these safeguards to prevent serious injury or death.
DS-K1F600-D6E Series Enrollment Station User Manual • The device cover for indoor use shall be kept from rain and moisture. • Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger). • Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time.
DS-K1F600-D6E Series Enrollment Station User Manual Contents Chapter 1 Overview .................................................................................................................... 1 Chapter 2 Appearance ................................................................................................................ 2 Chapter 3 Activation ................................................................................................................... 3 3.1 Activate via Device .............
DS-K1F600-D6E Series Enrollment Station User Manual 6.5.4 Other Settings ............................................................................................................. 25 6.5.5 Set Biometric Parameters ........................................................................................... 26 6.6 Data Management ............................................................................................................... 27 6.6.1 Import User ...............................................
DS-K1F600-D6E Series Enrollment Station User Manual Chapter 1 Overview Introduction Figure 1-1 Product Appearance The enrollment station can realize multiple user information's enrollment on one device. It supports enrolling face picture, fingerprint, 13.56 MHz IC card No., and 125KHz ID card No. Features • • • • • • • • 3.97-inch LCD touch screen for face recognition, parameters settings, live view, etc. 2 MP wide-angle dual-lens Face anti-spoofing Face recognition distance: 0.
DS-K1F600-D6E Series Enrollment Station User Manual Chapter 2 Appearance Figure 2-1 Appearance Table 2-1 Appearance Description No.
DS-K1F600-D6E Series Enrollment Station User Manual Chapter 3 Activation You should activate the device before the first login. After powering on the device, the system will switch to Device Activation page. Activation via the device, SADP tool and the client software are supported. The default values of the device are as follows: • The default IP address: 192.0.0.64 • The default port No.: 8000 • The default user name (super administrator): admin 3.
DS-K1F600-D6E Series Enrollment Station User Manual 3.2 Activate via SADP SADP is a tool to detect, activate and modify the IP address of the device over the LAN. Before You Start • Get the SADP software from the supplied disk or the official website http:// www.hikvision.com/en/ , and install the SADP according to the prompts. • The device and the PC that runs the SADP tool should be within the same subnet. The following steps show how to activate a device and modify its IP address.
DS-K1F600-D6E Series Enrollment Station User Manual Chapter 4 Enroll via Device 4.1 Enroll Face via Device Before You Start • Power on and activate the device. For details about the activation, see Activation . • Enable Face Required in Set Enrollment Rule after logging in the device backend. Steps 1. Tap on the initial page. 2.
DS-K1F600-D6E Series Enrollment Station User Manual Note For details about face recognition, see Tips When Collecting/Comparing Face Picture . 5. Optional: Tap to edit the employee ID. 4.2 Enroll Fingerprint via Device Before You Start • Power on and activate the device. For details about the activation, see Activation . • Set fingers in Select Finger in Set Enrollment Rule after logging in the device backend. Steps 1. Tap on the initial page. 2.
DS-K1F600-D6E Series Enrollment Station User Manual 4) Optional: Tap the enrolled fingerprint (in blue) and tap OK in the dialogue box to clear the enrolled data and enroll a new fingerprint. 5. Optional: Tap to edit the employee ID. 4.3 Enroll Card via Device Before You Start • Power on and activate the device. For details about the activation, see Activation . • Set Card Number per User and Card No. Length in Set Enrollment Rule after logging in the device background. Steps 1. Tap on the initial page. 2.
DS-K1F600-D6E Series Enrollment Station User Manual Chapter 5 Enroll via Client Software 5.1 Enroll Face via Client Software Before You Start • Download and install the client software on your computer before enrollment. • Power on and activate the device. For details about the activation, see Activation . Follow the steps below to enroll face. Figure 5-1 Flow Diagram of Enrolling Face Steps 1. Connect the device to the network. 2. Place the device on the desk. 3.
DS-K1F600-D6E Series Enrollment Station User Manual The added organizations will be displayed in the list on the left of the page. 5. Add person. 1) Select an organization from the list on the left. 2) Click Add on right panel. 3) Set the person's basic information, including the person's name, gender, email, tel, effective period, and remark.
DS-K1F600-D6E Series Enrollment Station User Manual - Click Add and New to add the person and continue to add other persons. 5.2 Enroll Fingerprint via Client Software Before You Start • Download and install the client software on your computer before enrollment. • Power on and activate the device. For details about the activation, see Activation . Follow the steps below to enroll fingerprint. Figure 5-4 Flow Diagram of Enrolling Fingerprint Steps 1. Connect the device to the network. 2.
DS-K1F600-D6E Series Enrollment Station User Manual Figure 5-5 Add Organization 3) Create an organization name. Note Up to 10 levels of organizations can be added. The added organizations will be displayed in the list on the left of the page. 5. Add person. 1) Select an organization from the list on the left. 2) Click Add on right panel. 3) Set the person's basic information, including the person's name, gender, email, tel, effective period, and remark.
DS-K1F600-D6E Series Enrollment Station User Manual Figure 5-6 Add Person Note Once the person information is expired, the credentials and access control settings of the person will be invalid and the person will have no authorization to access the doors. 6. On the Credential → Fingerprint panel, click +. 7. In the pop-up window, select the collection mode as Remote and select Enrollment Station as the fingerprint recorder from the drop-down list.
DS-K1F600-D6E Series Enrollment Station User Manual 8. Set the enrollment station's information. 1) Click Settings and set the enrollment station's IP address, port No., user name and password. 2) Click OK. 9. Enroll the fingerprint. 1) Click Start to start enrollment. 2) Follow the instructions on the enrollment station to enroll the fingerprint. 3) Click Add to save the enrollment. 10. Confirm to add the person. - Click Add to add the person and close the Add Person window.
DS-K1F600-D6E Series Enrollment Station User Manual Figure 5-9 Add Organization 3) Create an organization name. Note Up to 10 levels of organizations can be added. The added organizations will be displayed in the list on the left of the page. 5. Add person. 1) Select an organization from the list on the left. 2) Click Add on right panel. 3) Set the person's basic information, including the person's name, gender, email, tel, effective period, and remark.
DS-K1F600-D6E Series Enrollment Station User Manual Figure 5-10 Add Person 6. 7. 8. 9. Note Once the person information is expired, the credentials and access control settings of the person will be invalid and the person will have no authorization to access the doors. On the Add window, click Credential → Card . Add the card No. 1) Click + → Settings . 2) Set the mode as Remote and select the card enrollment station from the drop-down list. 3) Set the enrollment station's IP address, port No.
DS-K1F600-D6E Series Enrollment Station User Manual This card is used for the inspection staff to check the their attendance of inspection. By swiping the card on the specified card reader, the person is marked as on duty of inspection at that time. Dismiss Card By swiping the card on the card reader, it can stop the buzzing of the card reader. 10. Click Add. 11. Confirm to add the person. - Click Add to add the person and close the Add Person window.
DS-K1F600-D6E Series Enrollment Station User Manual 2. 3. 4. 5. Select an organization to import the person. Click Get from Device. Select Enrollment Station from the drop-down list. Configure the enrollment station's information. 1) Click Settings. 2) Set the enrollment station's IP address, port, user name of the device administrator, and password. 3) Click OK. 6. Click Export Template and you can export the template to the PC. 7. Edit person's information and save. 8.
DS-K1F600-D6E Series Enrollment Station User Manual Chapter 6 Basic Operation 6.1 Login Login the device backend to set the device basic parameters. You should enter the device activation password for the first login. Or if you have add an administrator's face picture, you can login via the added face picture. 6.1.1 Login by Activation Password Login the device backend to set the device basic parameters. You should enter the device activation password for the first login. Steps 1.
DS-K1F600-D6E Series Enrollment Station User Manual Note The device will be locked for 30 minutes after 5 failed password attempts. 5. Optional: Tap to exit the page and be back to the initial page. 6.1.2 Login by Administrator Login the device backend to set the device basic parameters. If you have add an administrator's face picture, you can login via the added face picture. Before You Start Add an administrator and add a face picture for the administrator. For details, see Add Administrator . Steps 1.
DS-K1F600-D6E Series Enrollment Station User Manual 3. Optional: Tap 4. Optional: Tap and you can enter the added admin user name and password to login. and you can exit the page and be back to the initial page. 6.2 Add Administrator The administrator can login the device backend and configure the device parameters. Steps 1. Long tap on the initial page for 3 s and login the device home page. 2. Tap Admin to enter the Administrator page. Figure 6-5 Administrator Page 3.
DS-K1F600-D6E Series Enrollment Station User Manual 4. Tap • • • • to save the settings. Note By default, the system contains a super administrator. You cannot edit its No., name, and type. and you cannot delete it. The administrator's No. and name cannot be edited. Up to 5 administrators can be added. The face and password of the super administrator, normal administrator, and normal user cannot be the same. 6.3 Communication Settings Set the device wired network and wireless network.
DS-K1F600-D6E Series Enrollment Station User Manual After enabling WLAN, you should select a Wi-Fi for connection. Enter the Wi-Fi's password, IP address, subnetmask, and gateway. Tap to save the settings. Or enable DHCP and enter the Wi-Fi's password to connect. Tap to save the settings. 6.4 Manage Enrollment You can view the enrolled person information and delete the enrolled data. Steps 1. Long tap on the initial page for 3 s and login the home page. Tap Enrollment.
DS-K1F600-D6E Series Enrollment Station User Manual 6.5 System Settings 6.5.1 Set Time You can set the device time format and the current time. Long tap on the initial page for 3 s and login the device home page. Tap System → Time . Figure 6-10 Time Settings Page You can set the device time format and the current time. 6.5.2 Set Sound Enable or disable the Keypad Sound and Voice Volume. You can also adjust the Voice Volume. Long tap on the initial page for 3 s and login the device home page.
DS-K1F600-D6E Series Enrollment Station User Manual Note The available volume range is from 0 to 10. The larger the value, the louder the volume. 0 represents disable the voice prompt function. 6.5.3 Set Enrollment Rule Set the enrollment rules before data enrollment. Long tap on the initial page for 3 s and login the home page. Tap System → Enrollment Rules .
DS-K1F600-D6E Series Enrollment Station User Manual When enter a name in the enroll user page, the system will compare the name with all names in the database to avoid name duplication. Face Required You must enroll the person's face when enrolling a person's information. Select Finger Set the enrolling fingers when enrolling a person's fingerprint. Card Number per User Set the maximum card number that a person can enroll. Card No. Length Set the card No.'s length when enrolling a person's information. 6.
DS-K1F600-D6E Series Enrollment Station User Manual 25 frames per second. Suitable for mainland China, Hong Kong (China), the Middle East countries, Europe countries, etc. NTSC 30 frames per second. Suitable for the USA, Canada, Japan, Taiwan (China), Korea, the Philippines, etc. 6.5.5 Set Biometric Parameters You can customize the face parameters to improve the face recognition performance.
DS-K1F600-D6E Series Enrollment Station User Manual Parameter Description Yaw Angle The maximum yaw angle when starting face authentication. By default, the angle is 45°. Pupillary Distance The minimum resolution between two pupils when starting face recognition. The actual resolution should be larger than the configured value. By default, the resolution is 40. 6.6 Data Management You can import user list, export user list template, export enrolled data, and clear enrolled data. 6.6.
DS-K1F600-D6E Series Enrollment Station User Manual or JPG. The resolution should be more than 640 × 480 pixel. The picture size should be between 60 KB and 200 KB. 5. Tap Import User. Note Up to 20,000 users can be imported. Result The system will read the user information in the USB flash drive automatically and import the data to the device. 6.6.2 Export Enrolled Data Export enrolled data from the device to the USB flash drive.
DS-K1F600-D6E Series Enrollment Station User Manual 6.6.3 Clear Enrolled Data Delete all enrolled data in the device, including all face pictures, fingerprints, card, etc. Long tap on the initial page for 3 s and login the home page. Tap Data. Figure 6-17 Data Management Page Tap Clear Enrolled Data to delete all enrolled data in the device, including all face pictures, fingerprints, card, etc. 6.7 System Maintenance You can view the device system information and capacity.
DS-K1F600-D6E Series Enrollment Station User Manual Capacity You can view the number of administrator, user, face picture, card, and event. Note Parts of the device models support displaying the fingerprint number. Refers to the actual page for details. Restore to Default All parameters, except for the communication settings, remotely imported user information, will be restored to the default settings. The system will reboot to take effect.
DS-K1F600-D6E Series Enrollment Station User Manual Appendix A. Tips When Collecting/Comparing Face Picture The position when collecting or comparing face picture is as below: Expression • Keep your expression naturally when collecting or comparing face pictures, just like the expression in the picture below. • Do not wear hat, sunglasses, or other accessories that can affect the facial recognition function. • Do not make your hair cover your eyes, ears, etc. and heavy makeup is not allowed.
DS-K1F600-D6E Series Enrollment Station User Manual Appendix B. Tips for Scanning Fingerprint Recommended Finger Forefinger, middle finger or the third finger. Correct Scanning The figure displayed below is the correct way to scan your finger: You should press your finger on the scanner horizontally. The center of your scanned finger should align with the scanner center.
DS-K1F600-D6E Series Enrollment Station User Manual Others If your fingerprint is shallow, or it is hard to scan your fingerprint, we recommend you to use other authentication methods. If you have injuries on the scanned finger, the scanner may not recognize. You can change another finger and try again.
UD16571B
