User's Manual

The added organizaons will be displayed in the list on the le of the page.
5. Add person.
1) Select an organizaon from the list on the le.
2) Click Add on righ
t panel.
3) Set the person's basic informaon, including the person's name, gender, email, tel, eecve
period, and remark.
Figure 5-3 Add Person
Note
Once the person informaon is expired, the credenals and access control sengs of the
per
son will be invalid and the person will have no authorizaon to access the doors.
6. Enr
oll the face.
1) On the Add window, click Add Face → Remote .
2) Enable Verify by Device to check whether the device managed in the client can recognize the
face in the photo.
3) Select the enrollment staon from the drop-down list.
4)
Click Sengs and set the enrollment staon's IP address, port No., user name and password.
5) Oponal: Enable Face An-Spoong funcon and set the liveness level according to your
actual needs.
6) Click OK.
7) Face the enrollment staon's camera and capture a picture according to the instrucons on
the enr
ollment staon.
8) Click
to capture again.
9)
Click OK.
7. Conrm to add the person.
-
Click Add t
o add the person and close the Add Person window.
DS-K1F600-D6E Series Enrollment Staon User Manual
9