User's Manual

8. Set the enrollment staon's informaon.
1) Click Sengs and set the enrollment staon's IP address, port No., user name and password.
2)
Click OK.
9. Enroll the ngerprint.
1) Click Start to start enrollment.
2) Follow the instrucons on the enrollment staon to enroll the ngerprint.
3) Click Add to save the enrollment.
10. Conrm to add the person.
-
Click Add to add the person and close the Add Person window.
-
Click Add and New to add the person and connue to add other persons.
5.3 Enroll Card via Client Soware
Before You Start
• Download and install the client soware on your computer before enrollment.
• Power on and acvate the device. For details about the acvaon, see Acvaon .
Follow the steps below to enroll face.
Figure 5-8 Flow Diagram of Enrolling Card
Steps
1. Connect the de
vice to the network.
2. Place the device on the desk.
3. Login the client soware on the computer.
4. Add an organizaon.
1) Click P
erson to enter the Person page.
2) Click Add on the upper le of the page.
DS-K1F600-D6E Series Enrollment Staon User Manual
13