User's Manual

Figure 5-10 Add Person
Note
Once the person informaon is expired, the credenals and access control sengs of the
per
son will be invalid and the person will have no authorizaon to access the doors.
6. On the Add windo
w, click Credenal → Card .
7. Add the card No.
1) Click + → Sengs .
2)
Set the mode as Remote and select the card enrollment staon from the drop-down list.
3) Set the enrollment staon's IP address, port No., user name and password.
4) Set the RF card type. The device can recognize the checked card type.
5) Click OK.
8. Enter the card No.
-
Enter the card number manually.
-
Place the card on the card enrollment staon and click R
ead to get the card No. The card
number will display in the Card No. eld automacally.
9. Select the c
ard type according to actual needs.
Normal Card
The card is used for opening doors for normal usage.
Duress Card
When the person is under duress, he/she can swipe the duress card to open the door. The
door will be unlocked and the client will receive a duress event to nofy the security
personnel.
Patrol Card
DS-K1F600-D6E Series Enrollment Staon User Manual
15