User's Manual

This card is used for the inspecon sta to check the their aendance of inspecon. By
swiping the card on the specied card reader, the person is marked as on duty of inspecon
at that me.
Dismiss Card
By swiping the card on the card reader, it can stop the buzzing of the card reader.
10. Click Add.
11. Conrm to add the person.
-
Click Add t
o add the person and close the Add Person window.
-
Click Add and New to add the person and connue to add other persons.
5.4 Get Person Informaon from Enrollment Staon
You can get the person informaon from the device for further operaons.
Steps
Note
• If the person name stored in the device is empty, the person name will be lled with the issued
c
ard No. aer imporng to the client.
• The gender of the persons will be Male by default.
• If the card number or person ID (employee ID) stored on the device already exists in the client
database, the person with this card number or person ID will not be imported to the client.
1. En
ter Person module.
2. Select an organizaon to import the persons.
3. Click Get from Device.
4. Select Enrollment Staon from the drop-down list.
5. Congure
the enrollment staon's informaon.
1) Click Sengs.
2) Set the enrollment staon's IP address, port, user name of the device administrator, and
password.
3) Click OK.
6. Click Get to start imporng the person informaon to the client.
The per
son informaon, including person details, person's ngerprint informaon (if
congured), and the linked cards (if congured), will be imported to the selected organizaon.
5.5 Import Person Informaon in Batch
You can import the persons informaon in batch.
Steps
1. Enter the Person module.
DS-K1F600-D6E Series Enrollment Staon User Manual
16