User's Manual

Note

• Press the up or down key on the keypad to change the input method.

• Up to 64 characters are allowed in the user name.

Card

Set: Present card on the card presenng area or enter card No. manually, and select a card

property.

View Info.: View the user's added card informaon.

Note

• The card No. is required.

• Up to 20 digits can be contained in the card No.

• The card No. can be 0.

• The card No. can start with 0 when it contains more than one numbers. E.g. 012345.

• The card No. should be used for once.

FP (Fingerprint)

On the Fingerprint page, select a target nger and record according to the voice prompt.

Note

• The same ngerprint cannot be repeatedly added.

• Up to 10 ngerprints can be added to one user.

• You can also scan the ngerprints via the external ngerprint recorder and apply the

ngerprints to the device by the client soware.

• For detailed informaon about scanning the ngerprint, see Tips for Scanning Fingerprint .

• Parts of device models supports the ngerprint funcon.

3. Press # to save the sengs and exit the page.

6.2 Login

communicaon, the user, the access control parameters, the me, the report, the system, etc.

Hold * for 3 s to enter the login page. Select FP, DEV PWD (Device Password), or Card, and

authencate to enter the home page.

Note

• Press F1 on the keypad to change the input method.

• The login page varies depending on dierent device model. When operaon, refer to the actual

device page.

Access Control Terminal User Manual