User's Manual

6.3.4 Set Wiegand Parameters

You are able to set the Wiegand direcon (send/receive) and the Wiegand mode (Wiegand 26/

Wiegand 34).

Steps

1. Move the cursor and select Comm. → Wiegand .

Figure 6-5 Wiegand Sengs

2. Set the Wiegand parameters.

Direcon

Send

The device can connect to the access controller to upload the card No. bia the Wiegand 26

or the Wiegand 34 mode.

Receive

The terminal can connect to the Wiegand card readers. No need to congure the Wiegand

mode.

Mode

Wiegand 26 and Wiegand 34 can be selected. The default Wiegand mode is Wiegand 34.

3. Press * and select Yes to save the sengs and exit the page.

6.3.5 Set RS-485 Parameters

The face recognion terminal can connect card reader via the RS-485 terminal.

Steps

1. Move the cursor and select Comm. → RS-485 on the Home page to enter the RS-485 page.

Access Control Terminal User Manual