User's Manual

Note
• All persons can enter the main page by entering the device password to operate if there is
no admin user congured.
• Aer conguring the admin, you should authencate the admin to enter the main page.
• You can use the USB interface to import the user informaon. For details, see Data
Transfer .
3. Press * to save the sengs and exit the page.
6.4.2 Manage Person (Search/Edit/Delete)
Search, edit, delete the added users. You can also manage added ngerprints, manage user's cards.
Search User
Move the cursor and select User → User to enter the user list.
Enter the user's name or employee ID in the search box, and press * to start search.
Edit User
Move the cursor and select User → User to enter the user list. Select an user in the list and press *.
Select Edit User and refer to Add Person to edit the user's informaon.
Delete
You can delete user, delete password, clear all ngerprints, and clear all added cards' informaon .
6.5 Identy Authencaon
Aer network conguraon, system parameters conguraon and user conguraon, you can go
back to the inial page for identy authencaon. The system will authencate person according
to the congured authencaon mode.
Authencaon via Mulple Credenals
If the congured authencaon mode is Card & Password, Card & Fingerprint, Card & Fingerprint
& Password, you should authencate the card rst, and then authencate other credenals
according to the prompt.
If the congured authencaon mode is Fingerprint & Password, you should authencate the
ngerprint rst, and then authencate other credenals according to the prompt.
Note
• Parts of device models supports the ngerprint funcon.
• For details about ngerprint authencaon, see Tips for Scanning Fingerprint .
Access Control Terminal User Manual
32