User's Manual

• Do not power o during the device upgrading.

• Aer the upgrading is completed, remove the USB ash drive.

Online upgrade: The system will gain the upgrade package from the plaorm to upgrade.

6.7.4 Restore Sengs

Restore system parameters to factory sengs or default sengs.

Steps

1. Move the cursor and select System → Reset .

2. Press * to enter the Reset page.

Figure 6-11 Reset Page

3. Select Factory Sengs or Default Sengs.

Factory Sengs

All parameters of the device will restore to the factory parameters.

Default Sengs

All parameters, excluding the communicaon parameters, the remote user management,

and events, will restore to the factory parameters.

4. Press * to conrm the sengs in the prompt page and the device starts restoring.

6.7.5 Data Transfer

You can export the access control parameters (ngerprint and user informaon) and the

aendance data (data aer aendance, card swiping data for instance). You can also import the

access control parameters from the USB ash drive.

Export Data

Move the cursor and select Transfer → Export to enter the Export page.

Access Control Terminal User Manual