User's Manual

Figure 6-12 Export Data Page

Plug a USB ash drive in the device USB interface, and select Export ACS Para. or Export

Aendance Data, enter the key, and press *. The data will be exported to the USB ash drive.

Note

• The supported USB ash drive format is FAT32.

• The USB ash drive memory should be from 1G to 32G. Make sure the free space of the USB

ash drive should be more than 512 M.

• Remember the key property, and you should use the key to import the data to another device.

Import Data

Move the cursor and select Transfer → Import to enter the Import page. Select Import ACS Para,

enter the key, and press *. The system will gain access control parameters from the USB ash drive.

Note

• The supported USB ash drive format is FAT32.

• The le for imporng should be in the root directory.

6.7.6 Log Query

You can search the authencaon logs via the user's employee ID, name, or card.

Steps

1. On the Home page, move the cursor and select Log.

Access Control Terminal User Manual