User's Manual
Figure 6-14 Time Page
2. Edit the parameters.
Date
The displayed date on the device.
Note
The available range is from 1970.01.01 to 2037.12.31.
Time
The displayed me on the device.
DST
Select to enable or disable the DST. When the DST is enabled, you can set the DST bias me,
the start me and the end me.
• DST Bias: You can select 30min, 60min, 90min and 120min.
• Start: Set the start me of the DST.
• End: Set the end me of the DST.
3. Press ESC and select Yes to save the sengs and exit the page.
6.7.8 View System Informaon
View system informaon, including system capacity and device informaon.
Access Control Terminal User Manual
40