User's Manual

2. Oponal: Select an organizaon in the list.

Note

All persons' informaon will be exported if you do not select any organizaon.

3. Click Export to open the Export panel and check Person Informaon as the content to export.

4. Check desired items to export.

5. Click Export to save the exported CSV le in your PC.

7.4.13 Get Person Informaon from Access Control Device

If the added access control device has been congured with person informaon (including person

details, ngerprint, and issued card informaon), you can get the person informaon from the

device and import them to the client for further operaons.

Steps

Note

• If the person name stored in the device is empty, the person name will be lled with the issued

card No. aer imporng to the client.

• The gender of the persons will be Male by default.

• If the card number or person ID (employee ID) stored on the device already exists in the client

database, the person with this card number or person ID will not be imported to the client.

1. Enter Person module.

2. Select an organizaon to import the persons.

3. Click Get from Device.

4. Select the access control device from the drop-down list.

5. Click Get to start imporng the person informaon to the client.

The person informaon, including person details, person's ngerprint informaon (if

congured), and the linked cards (if congured), will be imported to the selected organizaon.

7.4.14 Move Persons to Another Organizaon

You can move the added persons to another organizaon if you need.

Before You Start

• Make sure you have added at least two organizaons.

• Make sure you have imported person informaon.

Steps

1. Enter Person module.

2. Select an organizaon in the le panel.

The persons under the organizaon will be displayed in the right panel.

Access Control Terminal User Manual