User's Manual

Note
●
Y
ou can also change the sengs in System Sengs.
●
If you install the device indoors near the window or the face recognion funcon is not
working well, select Others.
●
If you do not congure the applicaon mode and tap Next, the system will select Indoor by
default.
●
If you acvate the device via other tools remotely, the system will select Indoor as the
applicaon mode by default.
6.3 Set Network Parameters
Aer
acvaon and select applicaon mode, you can set the network for the device
Steps
1.
When you enter the Select Network page, tap Wired Network or Wi-Fi for your actual needs.
Figure 6-3 Select Network
Note
Disconnect the wired network before connecng a Wi-Fi.
2.
T
ap Next.
DS-K1T320 Series Face
Recoginon Terminal User Manual
18