User's Manual

14.6.7 Network Sengs
Set TCP/IP, port, Wi-Fi parameters, ISUP, and plaorm access.
Note
Some device models do not support Wi-Fi or mobile data sengs. Refer to the actual products
when conguraon.
Set Basic Network Parameters
Click Conguraon → Ne
twork → Network Sengs → TCP/IP .
Figure 14-5 TCP/IP Sengs Page
Set the parameters and click Sa
ve to save the sengs.
NIC Type
Select a NIC type from the drop-down list. By default, it is Auto.
DHCP
If uncheck the funcon, you should set the IPv4 address, IPv4 subnet mask, IPv4 default
gateway, Mac address, and MTU.
If you check the funcon, the system will allocate the IPv4 address, IPv4 subnet mask, the IPv4
de
fault gateway automacally.
DNS Server
Set the preferred DNS server and the Alternate DNS server according to your actual need.
DS-K1T320 Series Face
Recoginon Terminal User Manual
85